Fender Vintage Steel Tremolo Bridge Block
Genuine Fender bridge block for a vintage or vintage reissue Stratocaster with tremolo.

$ 22.95

Fender Vintage '75 Jazz Bass Bridge Assembly
Fender® American Vintage '75 Jazz Bass® Bridge Assembly, raw unpackaged part does not include mounting hardware.

$ 33.95

Fender Vintage Tele Bridge Assembly
This is an authentic Fender® Vintage Telecaster® 6-Saddle Bridge Assembly. It comes in a chrome finish.

$ 36.95

Bigsby B7 Vibrato Kit
For archtop and solidbody carved top guitars. Includes vibrato, necessary mounting hardware and instructions.

$ 159.95

Fender HMV High Mass Vintage Bass Bridge Assembly
This is a Fender bass bridge assembly for American Standard instruments from 2008-Present. It is finished in chrome.

$ 69.99

Fender Vintage Bass String Post Bushing Set (Nickel)
This is a genuine Fender replacement set of 4. Nickel plated for vintage and vintage reissue basses.

$ 6.95

All Parts Tilted Brass Tele Saddles
Tilt-Compensated brass bridge saddles for Telecasters® Set of 3 with screws & springs.

$ 16.95

Fender Vintage Strat Bridge Cover
Vintage style Stratocaster bridge cover for vintage bridge assemblies. "Ashtray", chrome finish. For USA & Mexico Vintage Bridges only.

$ 9.99

Floyd Rose Original Tremolo Chrome
Original Floyd Rose Tremolo Arm in Chrome.

$ 15.99

All Parts Bridge Saddles for Strat (Chrome)
Set of 6 Bridge Saddles with Springs and Screws for Strat, Chrome. 2-3/16" string spacing.

$ 19.95

All Parts Gotoh Bass Bridge (Gold)
Gotoh Bass Bridge, Gold, With Screws 2-1/4 inch String Spacing Plate - 3-5/32 inches x 2-3/32 inches

$ 54.95

All Parts Gotoh Tune-o-matic Bridge (Nickel)
Gotoh Nashville Tune-o-matic bridge, Nickel, 2-1/16" string spacing, 2-29/32" post spacing, 12" radius. Includes mounting hardware.

$ 29.95

Fender American Series Tele Bridge
Authentic Fender replacement chrome plated steel bridge plate with 6 fully adjustable powder coated, Amerian Series bridge saddles for string-through-body Telecasters. Mounting Hardware included. Used on Am Series/Am Standard Telecasters.

$ 54.99

Floyd Rose Tremolo Arm Black
Replacement tremolo arm for black Floyd Rose tremolo bridge.

$ 23.99

Vibramate Quick Mount Bigsby Kit (V7-LP)
Now you can install a Bigsby Vibrato on your carved top Les Paul® guitar without drilling any holes!

$ 47.99

Vibramate Quick Mount Bigsby Kit (V5ST Short Tail)
For guitars with a pickguard by the mounting studs. Now you can add a Bigsby to your tune-a-matic style guitar without drilling any holes! Designed for use with a Bigsby B5 Original Vibrato (not included), and will fit most traditional style guitars with a tune-o-matic style bridge and a stop-tailpiece....

$ 48.95

Fender Vintage Telecaster Bridge Cover
This is an authentic Fender® Vintage Telecaster® "Ashtray" bridge cover in chrome finish. For USA & Mexico Vintage Bridges only.

$ 14.95

Bigsby B5 Tele Vibrato Kit
The Bigsby B5 Vibrato Tailpiece Kit is for flat-top solid body guitars. The kit Includes vibrato, bridge assembly, bridge plate, necessary mounting hardware and instructions. Ideal for Telecasters.

$ 184.00

Joe Barden Vintage Tele Brass Saddle Set
Joe Barden Bridgeplate and Saddle Kits for vintage-style Telecasters solve all of the structural problems and intonation issues inherent in the original parts. These new Saddles are made to vintage specs, using the original brass material, but have their adjustment holes drilled at three different angles to provide correct intonation...

$ 28.99

Fender Left-Handed American Vintage Strat Tremolo System
Genuine Fender replacement. Includes: bridge assembly, claw, tremolo tension springs, tremolo arm, trem arm tip, trem arm tension spring, string tree, .050 hex adjustment wrench and and mounting screws. Used on the American Vintage Strats.

$ 104.99

Fender Vintage Tele Bridge Plate
Authentic Fender replacement for vintage and vintage reissue guitars, Chrome, for use with 3 Brass Saddles (not included, p/n 0990843000).

$ 9.95

All Parts Whizzo Buzz Stop Guitar Tremolo Roller
Roller attachment for Jaguar and Jazzmaster tremolos.

$ 34.95

Bigsby B7 Vibrato Tailpiece
For solid body archtop guitars. Tailpiece only, no bridge.

$ 149.99

Gibson Historic Spec Non-Wire ABR-1 Bridge (Nickel)
Straight from Gibson Guitar’s Historic Re-issue guitars come Gibson Gear’s new Historic Spec series – parts that have been specially designed to replicate the original parts used by Gibson in the late 1950s. With this Historic Non-Wire ABR-1 Bridge, Gibson has re-created the famous non-wire bridge it used on its...

$ 74.99

EVH D-Tuna Drop D Guitar Tuning System (Gold)
The EVH D-Tuna is a unique patented device that enables players to drop the E to D and back, in an instant. D-Tuna has been standard equipment on Eddie Van Halen's personal guitars. To install you remove the string locking screw from the low E-saddle on the bridge and replace...

$ 39.95

Fender Vintage Tele Bridge Saddles
This is a set of 3 Fender® Vintage Telecaster® Bridge Sections / Saddles. They come in a brass finish. Springs and screws included.

$ 15.99

Fender Trem Arm Tips (Aged White)
This is an authentic Fender replacement part.

$ 3.99

Gibson TP-6 Guitar Tailpiece (Chrome)
This tailpiece comes with studs & inserts. It is an authentic Gibson replacement part. The Music Zoo carries a full line of Gibson replacement parts, please contact us if you need assistance. Please note: we will ship Gibson products within the United States only.

$ 124.99

Fender Vintage Strat Bridge Saddles
Fender® Vintage Stratocaster® Bridge Sections / Saddles, Set of 6. Nickel plated saddles with centered intonation screws. Springs and screws included.

$ 24.99

Fender Vintage Jaguar & Jazzmaster Bridge Cover
Fender® Vintage Jaguar® / Jazzmaster® bridge cover in chrome. Raw unpackaged part for USA vintage bridges only.

$ 14.99

Bigsby B3 Vibrato Tailpiece for Thinline Archtop Guitars
For thinline archtop hollowbody guitars, perfect for the ES-335. Nickel plated. Includes tailpiece only, no bridge included.

$ 129.95

Bigsby B5 Vibrato Tailpiece (Gold)
For flat-top solid body guitars. Top mount with four screws. Frame is 4-1/4 long x 3-5/8 wide. 2-1/16 between rear mounting screws; 2-3/4 between front mounting screws. Tailpiece only, no bridge.

$ 194.99

Showing: 1 - 32 of 64