516.626.9292     Email UsMy AccountView Cart
Apr 24

“What year was my Taylor made?”

To help answer that question, Taylor Guitars has published a serial number guide that helps to date their guitars all the way back to the mid-70s.   According to Taylor’s website: “Our numbering system was a little less sophisticated in the early days, and we didn’t adhere to an actual production “schedule” until 1987. If your serial number is near the tail-end of a particular year’s sequence (pre-1987), your guitar might have been made very late that year, or very early the following year. Gradually, we got around to our current, more accurate formula for pinpointing the exact day that work was begun on a particular guitar.”  Follow the jump for the full table of numbers and years, plus some interesting historical information along the timeline.  This information is courtesy of Taylor Guitars.

To date your guitar, simply read the serial number found on the label inside your Taylor, match it to the range in the table below, and viola, you’ll see what year it was made.

[didn’t use serial numbers!] 1974 Employees Bob Taylor, Kurt Listug, and Steve Schemmer purchase the American Dream Musical Instrument Manufacturing shop in Lemon Grove, California, and change the name to Taylor Guitars; all rosewood used is Brazilian.
10109 to 10146 1975 Had to let most of our employees go after we used up our original capital; settled into being broke and trying to figure out how to make guitars.
20147 to 20315 1976 Guitar #20168 is the first Taylor made from East Indian rosewood; guitar #20179 is the latest Taylor “on record” to have the mortise neck joint (by the time we made #20229, we were not using mortise neck joints); Kurt hits the road to sell direct to dealers.
30316 to [–]450 1977 Taylor Guitars signs a distribution deal with the Rothschild company, an instrument distributor.
451 to 900 1978 Introduce 500 and 600 Series (600s were dark-stained mahogany with white binding).
901 to 1300 1979 Start using scalloped bracing on all 6- strings; terminate distribution deal with Rothschild.
1301 to 1400 1980 Still finishing up and selling off guitars started in 1979, before we let our employees go for the second time; sold some guitars to Musician’s Supply, and finally paid off a five-year-old bill for wood we’d purchased from Martin.
1401 to 1670 1981 Company takes out bank loan to purchase equipment to facilitate production.
1671 to 1951 1982 Kurt travels as far as Maine, selling Taylor guitars to dealers out of his car.
1952 to 2445 1983 Bob and Kurt buy out partner Steve Schemmer; purchase more equipment.
2446 to 3206 1984 Introduce Grand Concert body style (the earliest Grand Concert we know of is #2744); for the first time, Bob and Kurt represent their own guitars at the National Association Of Music Merchants show.
3207 to 3888 1985 Introduce the “Artist Series”. Latest model “on record” to have a label hand-signed by Bob Taylor is #3262.
3889 to 4778 1986 Introduce Dan Crary Signature Model.
4779 to 5981 1987 In July, move to 5,000-square-foot plant in Santee, California; guitar #5300 (a 510-C) is a “transitional” instrument (built in the original Lemon Grove shop, but strung-up in the new Santee facility).
5982 to 7831 1988 Gross $1 million for the first time in the company’s history.
7832 to 10070 1989 Begin making our own cases (August). Purchase our first Fadal, a CNC (computer-controlled) milling machine to increase the levels of productivity and precision in making guitar parts (December).
10071 to 12497 1990 Introduce Leo Kottke Signature Model.
12498 to 15249 1991 Introduce 410 model; first 400 Series numbers began with “4-” as in “4-0001” (ending number of 400s: 4-1132).
15250 to 17953 1992 In August, move into 25,000-square-foot plant in El Cajon, California; guitar #16250 (a 712) is a “transitional” instrument (built in Santee plant, strung-up in the new El Cajon facility); 400 series ending number: 3152.
930104001 to 931221124 1993 Introduce current numbering system (see below*).
940104001 to 941220130 1994 Introduce Grand Auditorium body style on 20th Anniversary, limited-edition models; in May, begin sanding all fingerboards on the new Fadal sander; publish premiere issue (Summer) of quarterly newsletter, Wood&Steel, which features a “Pushing the Envelope” story about the new fingerboard sander.
950103001 to 951219136 1995 Introduce Limited Edition Grand Auditoriums (GAs); create Pallet Guitar; introduce Taylor acoustic bass; in February, begin using ultraviolet (UV) finish on all Taylor guitars (see “The Finish Line: What UV Means to You” on the Details/Tech-Sheets page).
960102001 to 961219140 1996 Introduce Presentation Series; Baby Taylor; LKSM-6; Grand Auditoriums added to regular line; SKB cases for 400 Series; in January, begin making “curved” pegheads on all Dreadnoughts; introduce TaylorWare line of branded clothing and accessories.
970106001 to 971219144 1997 Re-open Custom Shop; in January, introduce new Dreadnought shape; SmartStart Guitar program; Cujo Guitar signed by author Stephen King; groundbreaking on new factory building.
980105101 to 981218144 1998 In January, Taylor Guitars’ website goes online; guitar line expanded to 61 models, including three new series (300, Koa, and Walnut), revamped 400, 600, 700, 800 Series, introduction of Baby-M and AB-3 maple/spruce bass; release of Sounds of Wood&Steel: A Windham Hill Collection, a CD featuring numerous artists playing Taylor guitars and basses; in August, begin moving into new factory/office building; introduce re-designed label and begin affixing them to the back of the interior of each guitar, where they’re easily visible.
990104101 to 991220148 1999 In January, introduce Bob Taylor’s “new-tech” design, representing the first re-design of the acoustic steel-string guitar in 100 years; Windham Hill releases Sounds of Wood&Steel2, a sequel to the 1998 CD collection; introduce new gig bag for the Baby Taylor; open 8,000-square-foot storage facility next to Taylor factory; enter agreement to factory-install Elixir strings, featuring Polyweb coating, on all Taylors.
20000103101 to 20001221160 2000 In January, we introduce the Gallery Series of guitars, featuring original, thematic artwork inlays (for 2000 it was “sea life”); also create our first new Signature Models in a decade, making guitars with Clint Black, Jewel, Kenny Loggins, Richie Sambora, Doyle Dykes, John Cephas, and Chris Proctor, and create a Limited Edition version of the Pallet Guitar; in April, the U.S. Patent and Trademark Office grants Bob Taylor his first-ever patent for his revolutionary new neck design; we add Taylor-branded guitar and bass gig bags; extend our Limited Warranty to Canadian Taylor owners and to owners of Baby Taylors, both retroactive, and establish our first official warranty repair center in Canada; on August 24, Bob Taylor and Kurt Listug sign a five-year lease agreement on a 22,000-square-foot building in Tecate, Mexico, where Taylor will make its hardshell cases; in September, we open an in-house production training room equipped to introduce prospective employees to a full range of guitar-making processes; re-design the Grand Concert and Jumbo bodies to bring them into aesthetic alignment with the proprietary Grand Auditorium and the re-designed Dreadnought; transform our former mega-storage facility into a full-time Baby Taylor factory, and add maple-, koa-, and rosewood-veneer Babys and a 15/16-size Big Baby to the line; launch a program to provide Baby Taylors to elementary schools that have guitar programs, beginning with a donation of 28 Babys to Emerson-Bandini Elementary School in an economically disadvantaged area of San Diego; make significant advancements in technology, including the implementation of a robotic buffing machine; push past 350 employees for the first time.

*From 1993 until the end of 1999, each Taylor guitar featured a nine-digit serial number that precisely pinpoints when work was begun on that guitar. (As of 2000, the serial number expanded to 11 digits to accommodate the four-digit year designation.) Reading left to right, the first two digits (or four starting in 2000) represent the year; the second pair of digits represents the month; and the third pair of digits represents the calendar day that work was begun. The seventh digit indicates whether the guitar is a 300 or 400 series (“0”) or a higher series (“1”); and the last two digits denote the guitar’s position in that day’s production sequence. So, for example, if the serial number were 980103004, it would break down as follows:

98: 1998 01: January 03: 3rd 0: 400 Series 04: 4th Guitar Made That Day

It should be emphasized that the serial number does not indicate when a guitar was finished, or when it was shipped. It takes days to make each Taylor guitar, and the serial number indicates only the day a particular guitar was started in assembly.

Effective November 2, 2009, Taylor officially revised its serial numbering system. The change occurred as part of a transition to a new software system that was implemented to improve the company’s inventory management. The new serial numbering convention takes into account Taylor’s two manufacturing locations: its main complex in El Cajon, California and a second factory complex located in nearby Tecate, Mexico.

The new, 10-digit serial numbering format identifies the factory of production, year, date and the assigned number of the guitar on that day’s production schedule, although the numerical sequence is slightly different from the previous system. For example, the serial number for the first guitar built in the El Cajon factory on November 2, 2009 is 1011029001. Here’s how it breaks down:

Factory: 1 Year (3rd Digit): 0 (2009) Month: 11 Year (4th Digit): 9 (2009) Prod. Sched. #: 001

Factory Designation:

1 = El Cajon

2 = Tecate

Accordingly, the serial number for the first guitar built in the Tecate factory on November 2, 2009 is 2011029001.

As with the previous serial numbering system, the serial number does not indicate when a guitar was finished, or when it was shipped, but the day the guitar’s body was assembled.


49 Responses to “Taylor Guitars Serial Number Dating Guide”

  1. roberto says:

    it is not clear what happens between 2000 and 2009.

    I have a 210E with SN 20061221214

    I suppose it is 2006 year, 21 december production, but I can-t decode the last 3 digits.
    Is it possible to know the production site?
    And what about materials? I know that 210 series moved from solid wood to laminate at a certain point,is it possible to know how was my guitar built?



  2. Michel Hudon says:

    You have the Day designation missing in your explanation of the new 10-dgit numbering explanation…….it takes a while clearing it up when you are not aware about this missing information…Am i wrong?

  3. Barbara Sellmann says:

    My Serial No: 1101092007

    Excuse me, but my English is not very good. I have got a question:
    Can you tell me when was my guitar made?

    Thank you very much
    Barbara Sellmann

  4. Hey says:

    Hey my serialn. is 20080319245 , im not sure when my guitar is made. Could someone help?

  5. PML says:

    Someone at Taylor Guitars or someone with an aptitude for algorithms should address the issue of dating the recent Taylor guitar. The example of November 2, 2009 simply makes no sense. Here it is cut and pasted from above:

    “For example, the serial number for the first guitar built in the El Cajon factory on November 2, 2009 is 1011029001. Here’s how it breaks down:

    Factory: 1 Year (3rd Digit): 0 (2009) Month: 11 Year (4th Digit): 9 (2009) Prod. Sched. #: 001”

    “The first digit – a one” identifying the factory OK. Then we come to ” Year (3rd Digit): which states 0. First of all, the third digit in the sequence is not a 0 but a 1. In either case how would this translate to 2009?


  6. Chris D. says:

    Thanks to PML, I thought I was missing something. Who ever wrote that sequence guide needs to double check thier work, jeez!!

  7. Chris S says:

    Took some research, but here is the current serial number decoded…
    1st number = Factory
    2nd # = The 3rd Digital of the Year
    3rd & 4th #’s = Month
    5th & 6th = Day
    7th = The 4th Digital of Year
    8th, 9th &10th = Production # of Guitar on that day


  8. Bob from Albany NY says:

    Based on my deciphering of your numbering system, my Baby Taylor was built in 1996 in El Cajon. It has a “-2” at the end of my serial numbers. Can someone tell me what that designation means?

  9. Carlos says:

    Hello guys, can someone answer me?
    I have a Taylor 514-CE, serial number 20020308131 and would like to know the year of manufacture.

    thank you

    Olá pessoal, alguém pode me responder?
    Tenho um Taylor 514-CE, serial number 20020308131 e gostaria de saber o ano de fabtricação.


    Carlos Bernardes

  10. Victor says:

    Thanks Chris S – it makes more sense now :)

  11. John says:

    Carlos, Production on your guitar began March 8, 2002. It was the 31st guitar begun that day.

  12. Bruce says:

    When I plug the serial number from my solid body Taylor Custom into the Taylor database, it responds that there is no such number. That number is 20071211931. Is there a separate serial number database for Taylor solid bodies?

  13. Ser. # a71125015 says:

    What Year is Serial # A71125015

  14. Joe says:

    My SN is 11091161103. When was my guitar made?



  15. Nancy Sheets says:

    I have a 1986 Dan Crary Sig model 810 serial number 4198 What is it worth? It does have a surface crack below the saddle to the left.

  16. Frode Nielsen says:

    I have a 210e SUNBURST
    Serial 2108252106

    Need all help I can get.

    All the best!


  17. John says:

    I have a Taylor 214-CE, serial number 311607800 and would like to know the year of manufacture.

  18. John says:

    I have a Taylor 214-CE, serial number 311607800 When was my guitar made?


  19. Antoine says:

    I have a K14 CE – Koa
    Number 20060426145
    Am I correct?:
    made in Tecate Mexico factory
    April 26, 2006
    and it was the 145th guitar that day
    I don’t understand which number defines how many of that series were made?

  20. robb says:

    I would like to inquire because i recently acquired a 314ce guitar with a 9 digit serial number. 110315004 which i think does not even follow the 9 digit convention of the 90s era. How can I determine its source and date ? Thanks

  21. Mark says:

    I have a 512 CE I am trying to find out what all the woods are specially the top which is dark and tight grained. Serial # 20060508103

  22. Wolfgang says:

    Neither Taylor’s Web site nor the other bloggers completely explain the short-lived 11-digit system. My serial # is 20090402601. I had to call Taylor Support to figure out what it meant, because when Taylor explains its 11-digit system, the model numbers 4 and 6 aren’t mentioned, yet that is the model number in my serial sequence. According to the Taylor Web site and its 11-digit explanation, the guitar was built in 2009, started on April 2, the 6 isn’t explained, and the 01 means it was the first one in that day’s production schedule. I have no idea whether it was the first T3 (my model) or the first guitar overall. So, apparently 6 means T3 since there are numbers for the T5 and solid bodies but nothing for the semi-hollow bodies. Nowhere in the 11-digit system does it say whether the guitar was made in the U.S. or Mexico, but Taylor Support did tell me all T3s are made in the U.S. If anyone has any other explanation for the 11-digit system and the missing numbers and point of origin, please chime in. Thank you very much.

  23. Mike says:

    Antoine: No, your guitar wasn’t made in Tecate. Your guitar was made in 2006 in El Cajon. All the high end guitars are made in California. A leading 2 only began to mean Tecate in 2009. The 2 in your s/n is part of the 4 digit year.

    Robb: Are you sure you didn’t miss a number?

    Mark: 500’s can be spruce, cedar, or mahogany. If it is really dark and has the same woods on the back and sides, it’s almost certainly mahogany. If the top is lighter than the back and sides but darker than spruce (the yellowish wood on most guitar tops), then it is probably western red cedar

    Roberto: Pretty sure 200 series has always been laminate back and sides with solid top. The s/n only tells you the date Taylor started building your guitar and the number it was on that day. Yours was the 214th started on 12/21/06.

    Carlos: 2002 is year of manufacture.

  24. Paul Perez says:

    What year was my Taylor 814ce built I am confused how you figure them out. The serial # 1104173091

  25. Bruce Elliott says:

    I tried dating my guitar but after hitting the submit key it tells me to re-check the number and then contact you… My guitar is a taylor DDX Left handed 2109081022. According to you, there is no such Taylor guitar with that number. I can send you a pic if you so desire. Cheers, B

  26. Jim Martin says:

    I have what appears to be a 1984 Taylor 710 serial # 3126 and was curious as to what kind of wood was used to make this great guitar.

  27. Fernando says:

    Could you please tell me more about a guitar i just purchased
    314-ce Mo. #20010523014

  28. Smitty Carbunkle says:

    This post is so messed up, and so confusingly written, it should be deleted. Unless that is your intent. To make dating Taylor guitars as confusing as possible.

    For everyone else, the year is derived from the second and seventh digit. Just pluck out the second number and the seventh number, put them together and that is the teo digit number for the year.

    Example: 1106080081 would have been made in 2010. Even simpler: -1—-0—.

    Got it.

  29. Igor says:

    who can tell me where my guitar was made SN: 20050725202

  30. […] PDF File Name: Taylor guitars serial number dating guide PDF Source: http://www.themusiczoo.com Download PDF: Taylor guitars serial number dating guide […]

  31. Jason Rossi says:

    I have a Lemon Grove 810 Serial Number 224 with herringbone sound hole inlay. What would the year and value be. Looks like someone hand wrote the serial number and the model number 810. The Robert’s signature is real, it’s not printed on. I can’t find a guide for this. Someone said it might be 1977. It’s the best guitar on the planet, plays like angels crying. I have NEVER heard a better guitar. Any information would be helpful.


  32. Jason Rossi says:

    Sorry for the typos. Would love any information on the guitar someone could provide.

  33. Delores says:

    I have a baby Taylor S/N 980506307-3, Mode 301-M with the amp. I have deciphered production started on it May, 06, 1998, series #is 300and it was the 7th guitar started in production that day. I have been told that it is a 1st edition. I was hoping that someone could verify that this information is correct and give me a value on it and the amp. The condition is very near perfect. Thanks so much.

  34. Delores, please give our sales staff a call at 1-844-MUSICZOO!

  35. Garry Edwards says:

    Without wanting to get too wrapped around the axles I have a 614CE dated accordingly: 09

  36. don wicher says:

    20010724346-2 is the serial number in my 306-GB big baby ,, wondering when and where it was made
    thank you don

  37. You can contact sales@themusiczoo.com! They should be able to help you out with that info.

  38. peter fitzpatrick says:

    model 410-kce serial 990720005
    looking for year made and value thanks

  39. sergey says:

    when my guitar was made: taylor 916 ce serial number 1108032177

  40. tason says:

    look at what Chris wrote (Nr.7), he is right. So your guitar was made in El Cajun, 03. August 2012 :)

  41. Kelso says:

    serial # 1101283123. It’s a 918e. I believe the decoding explanation says the guitar was made in El Cajon on January 28th 2013 and it was the 123rd guitar placed into production that day. When I plug the number into Taylor’s decoding box it returns “we show no such guitar” or something like that. Could this be true? Fraudulent copy? Seems impossible as the guitar looks like a perfect Taylor and plays great! Any thoughts out there on my mystery?

  42. Paul money says:

    Hi there, I have a Standard Solidbody but the only serial number I can find is on the plastic bridge adjustment cover on the back of the guitar. Did they not put the number on the back of the headstock? Anyway the number is 20071107960 Also there is no number on the registration booklet. Are there fake Taylor solidbodios around? Thanks

  43. Gino Forcina says:

    Please give me the DATE a Taylor 614ce was made.

    S/N: 1102263094

    Thank you; Gino

  44. clyde says:

    hi I just bought a 214ce 3 days ago (07/22/2015)I’ve noticed that the back portion of the guitar has some arch on it. I just want to know if it is normal or not?
    could anybody on this forum knows about it?


  45. Tom says:

    I have a T5X serial number 1103274155 what is the dating system

  46. Joey says:

    I have a. 510 serial number 980929101. I think it was made in 1998.But not sure

  47. roy huston says:

    Taylor taylor love love love forever and a eternity

  48. Noble Barlow says:

    Hi I have an 810 that l have owned for many years that I bought at a used guitar shop. Several years ago I had a Fishman pick up installed, and the guy lost the identification sticker. My question is, Is there another spot on the guitar with a serial number, and is there anyway that I can get a replacement identification tag.

  49. Bill Sutley says:

    I own a 614ce Maple body guitar with s/n 20020507120. Can someone provide the date of manufacture?

Leave a Reply

preload preload preload