EVH 5150 Iconic Series 40W 1x12 Combo Ivory

5150 Iconic Series 40W 1x12 Combo Ivory Item Description

When you're looking for searing EVH amplifier tones but perhaps at a stripped down layout, and at a price point for the gigging player? We have the answer for you: the EVH 5150 Iconic Series! This is the 40w 1x12" combo in ivory. Designed by renowned amp engineer, James Brown, the 5150® Iconic® Series 40-watt 1x12 combo, is powered by two JJ 6L6 power tubes and voiced with two JJ ECC83S preamp tubes, providing all the firepower the modern guitarist needs. Armed with a custom designed EVH 12” Celestion® speaker voiced specifically for this preamp circuit, the pristine cleans and searing high gain tones are tight, clear and articulate. The cabinet is constructed out of MDF with special internal plywood baffling for tight and increased bass response, and houses a custom designed EVH 12” Celestion® speaker voiced specifically for this preamp circuit, so that the pristine cleans and searing high gain tones are tight, clear and articulate. Each channel houses its own gain and volume controls, allowing for level-matching the volume when switching between the clean and high gain channels. The channel two noise gate’s quick attack suppresses any hiss while ensuring all staccato riffing is articulate and crisp, not choked and choppy. The Boost control on Channel 2 allows you to add another 10Db of foot-switchable volume to your tone — perfect for ensuring your solos cut through the mix. The control panel also includes shared EQ (Low, Mid and High), global resonance and presence knobs to adjust the low- and high-end aspects of your tone, and a global reverb control to add the perfect amount of bounce and decay for any room.Other features include a two-button footswitch, effects loop, dual parallel speaker output jacks, ¼ power switch to reduce wattage—allowing you to crank the amp and still preserve tone but without destroying your neighbor’s solitude, and a speaker-emulated DI XLR with power amp mute for accurate all-tube EVH tone for recording direct or using through any PA system.

Includes: Footswitch

Product Specs and Features

• 40 Watt Tube Amp
• Channel 1: Gain w/ Overdrive Switch; Channel 2 Gain w/ Burn Switch; Noise Gate Channel 2: Low, Mid, High EQ; Channel 1/ Channel 2 Volume, Master Boost, Global Reverb, Resonance, and Presence
• 2 x JJ 12AX7 Pre-Amp Tubes, 2 x JJ 6L6 Power Amplifier Tubes, Solid State Rectifier
• Two 1/4" Parallel Speaker Jacks, One XLR and One 1/4" Line Outs
• 12" EVH Celestion Custom Speaker
• 1/4 Power Level Switch